HobbyKing
TURNIGY 540L V-SPEC INRUNNER W/ IMPELLER 1025KV
| Diameter of shaft | 5mm |
| Length of front shaft | 14mm |
| Battery | 3-4 Cell 4S/14.8V |
| RPM | 1350kv |
| Max current | 40A |
| No load current | 2.4A |
| Internal resistance | 58.3ohm |
| Prop | APC9x4.5, APC10x4.7 |
| Max Current | 18.9A, 30.5A |
| Pull | 920g, 1360g |
| Prop | APC8x3.8, APC9x4.5 |
| Max Current | 24.5A, 28.5A |
| Pull | 1230g, 1580g |
| ESC | 60A |
| Battery Type | 3-4S Only |
Dimension:, 58mm x 36mm, 72mm(with shaft), Weight:, 173g (kv1025) (not including connectors), Lamination thickness: ., Data:, 3S 11.1V,
High torque inrunner, excellent for running propellers without needing a ...5 Reviews
HobbyKing
FOKKER DR.I TRIPLANE EPO R/C PLANE (PNF)
| Wing Span | 800mm |
| Length | 670mm |
| Flying Weight | 750~900g |
| Servo | 3x4.3g 1x9g |
| Motor | TURNIGY 2410-890Kv |
| ESC | 20A Brushless |
| Propeller | 9x4 Slow Fly |
| LiPo Battery | 1000~1300mAh 3S (max size |
| LiPo Battery | 1000~1300mAh 3S (max size |
5 Reviews
HobbyKing
TURNIGY 500 H3126 BRUSHLESS OUTRUNNER 1600KV
| Model | 3126 |
| Cells | 2~6S |
| No load Current | 4.1A/10V |
| Max power | 1500W |
| Weight | 186g |
| Shaft diameter | 5mm |
| Dimensions | 37.2 x 42mm |
| Recomended ESC | 2~6S/70A |
Turns: 4, Kv: 1600rpm/V,
This motor is specifically designed for the 500 helicopter range ...5 Reviews
HobbyKing
KB28-47-16S 2400KV BRUSHLESS MOTOR (FIN)
| Shaft Size | 3.17mm x 12mm |
| Motor Dimensions | 28mm x 48mm |
| Weight | 163g |
| Idle current | 1.0A |
| Resistance | 0.0385 |
Kv: 2400, Max Amp: 25,
KB28-47-16S Brushless Motor KB28-47-16S5 Reviews
HobbyKing
TURNIGY 1220 MINI GEARBOX SYSTEM 10300KV
| Diameter of shaft | 1.48mm |
| Length of front shaft | 7mm |
| Battery | 1 Cell 1S/3.7V |
| RPM | 10300kv |
| No load current | 3.7V/0.4A |
| Current capacity | 7A/15sec |
| Internal resistance | 0.342ohm |
| Dimensions | 12x22mm |
Dimension:, 22mm x 12mm, 30mm(with shaft), Weight:, 8.4g (kv10300) (not including connectors), Lamination thickness: ., Max current:6A,
2mm Spec.5 Reviews
HobbyKing
HOBBYKING SS SERIES 8-10A ESC
| Size | 30x18x2mm |
| Cells | 2-3S (Auto Detect) |
| Burst | 10A |
| Battery setting | LiPo and NiMH |
| Brake | Enable/Disable |
Weight: 6g, Max Current: 8A, BEC: 1A,
The Hobbyking SS series comes with a limited range of ...5 Reviews
HobbyKing
C2226 MICRO BRUSHLESS OUTRUNNER 1800KV (21G)
| Diameter | 22.2mm |
| Length | 28mm |
| Shaft | 5mm |
| Weight | 21g (with 10cm wire) |
| Power | 70W |
| Resistance | 657 |
| Idle Current | .5A |
| Max amp | 10A (15sec burst) |
| Voltage | 2-4cell Lipoly |
Kv: 1800rpm/v, Turns: 25,
Specifications. We do not have a suggested prop size for ...5 Reviews
HobbyKing
HACKER STYLE BRUSHLESS OUTRUNNER 20-34S
| Dimentions | 22x28mm |
| Rating | 1500kv |
| Battery Config | 2~3Lipo |
| Shaft | 3.175mm |
| Weight | 29gr |
| Standard Current | 2-6A |
Max Current: 8A,
5 Reviews
HobbyKing
HEXTRONIK 24GRAM BRUSHLESS OUTRUNNER 1500KV
| No Load Current | .5A |
| Suggested Lipo | 3 cell 11.1v |
| Thrust | 400g+ |
| Suggested Prop | 8x3.8 |
Max Load: 7A,
Brushless Outrunner Motor. Kv - 1500 Load Current 9A For ...5 Reviews
HobbyKing
TURNIGY AE-30A BRUSHLESS ESC
| Output | Continuous 30A, burst 35A up to 10 seconds. |
| Input Voltage | 2-4 cells lithium battery or 5-12 cells NIMH battery. |
| BEC | Linear 2A @ 5V |
| Control Signal Transmission | Optically coupled system. |
| Max Speed | 2 Pole |
| 6 Pole | 70,000rpm |
| 12 Pole | 35,000rpm |
| Size | 50mm (L) * 26mm (W) * 12mm (H). |
| Weight | 25g. |
| Multiple protection features | Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection |
| Factory default settings | Brake |
| Battery type | Li-xx (Li-ion or Li-Po) |
| Low voltage cutoff threshold | Soft cut-off (2.6V) |
| Timing setup | Low |
| Soft Acceleration Start Up | Normal |
| Low voltage cutoff type | Medium |
Specification:, Features:, High performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency., Programming features:, Brake setting (we recommend using brake for only folding props applications),
The Turnigy AE series are based on new powerful microprocessor. ...5 Reviews
HobbyKing
HACKER STYLE BRUSHLESS OUTRUNNER 20-22L
| Dimentions | 28x32mm |
| Rating | 924kv |
| Battery Config | 3 Lipo Cells |
| Shaft | 3.175mm |
| Weight | 56gr |
| Standard Current | 6-14A |
| Max Current | 17A |
| Suggested Prop | 11x4.7 |
5 Reviews
HobbyKing
HOBBYKING SS SERIES 35-40A ESC
| Weight | 27g |
| Size | 45x24x8mm |
| Cells | 2-3S (Auto Detect) |
| Max Current | 35A |
| Burst | 40A |
| Maximum Kv supported | 2000rpm/v |
| Battery setting | LiPo and NiMH |
| Brake | Enable/Disable |
BEC: 3A,
The Hobbyking SS series comes with a limited range of ...5 Reviews
HobbyKing
KB28-47-22S 1800KV BRUSHLESS MOTOR (FIN)
| Shaft Size | 3.17mm~12mm |
| Motor Dimensions | 28mm~48mm |
| Weight | 163g |
| Idle current | .6A |
| Resistance | 0.0715 |
Kv: 1800, Max Amp: 18,
KB28-47-22S Brushless Motor KB28-47-22S5 Reviews
HobbyKing
HK2836 EDF OUTRUNNER 3500KV FOR 64MM
| Specs | Kv- |
| Dimensions | 75 x 28mm |
| Shaft diameter | 3.0mm |
| Shaft length | 10mm |
| Voltage | 14.8V |
| Weight | 97g |
| Output Power | 520w |
| Max current(<60s) | 35A |
| RPM/V | 3500 |
| Thrust | 1100g(38.8oz.) |
| Recommended model weight | 600-800g |
| Recommended model fans | 64mm Fans |
| Mounting Hole Bolt Circle | 18mm |
| Mtg. Hole Number & Size | 4 x M2 |
5 Reviews
HobbyKing
TURNIGY 1:4 SCALE BRUSHLESS GOKART ARR.
| Length | 450mm |
| Width | (F)262mm / (R)305mm |
| Height | 201mm |
| Ground Clearance | 5~12mm |
| Top Speed | 45~60km/h |
| Tyres | 56×30mm / 58×45mm |
| Pinion | 13T |
| Driving Weight | 2,100g (approx.) |
| LiPo | 2S 4000~5200mAh Hardcase Lipo (140x48x50mm max size) |
The TURNIGY 1:4 scale gokart is a real blast to drive, with it's low center of gravity and ultra sticky TruRubber* tyres which keep the kart turning sharply. A powerful full size servo is included with kart to keep the steering precise and quick, while the non differential rear tyres lay rubber on each corner!, Gear Ratio: 13:2.37, Drive/Main Ratio: 13:47, T-Tube/Main Ratio: 20:30, TruRubber: TURNIGY's very own super-soft rubber compound that sticks to road surfaces better than standard street tyres.,
The entire floor pan is made of 4mm Carbon fiber ...5 Reviews